Paver-front-doorstep

Paver Sealer Stripping: When to Hire a Professional To Remove Failed Paver Sealer

We all know that pavers are a great way to enhance the look of any home. They’re versatile and durable, and can be used for patios, walkways or even driveway applications. But as with most products, there are some things that you should know before you start installing pavers yourself.

One of The most common question we hear from homeowners is “Why did my turn white?” Paver sealer stripping is essential if you want them to last more than a few years without showing signs of wear and tear like cracks or stains caused by weeds growing through them. In this article we’ll talk about why failed sealer turns white and hazy in the first place as well as what really goes into stripping your pavers so they look good again!

Brick-paver-to-be-restore

What is Paver Sealer Stripping?

Paver sealer stripping is a process in which failed or old paver sealer is removed. This can be done for a variety of reasons, including to repair damage, to prepare the surface for a new coating, or to remove an old coating. The process is typically done with a chemical paint stripper and equipment to strip away the old and failed paver sealer. Paver sealer stripping can be a time-consuming and costly process, but it is often necessary in order to ensure a high-quality finish. When done correctly, paver sealer stripping can help to extend the life of the brick pavers and improve their appearance.

Paver-to-be-stripped

Most of the time, pavers can be damaged by chemicals

Pavers are made from different kinds of materials. The most common is concrete, but there are also pavers made from brick, stone and other materials that can be damaged by chemicals. For example, one type of chemical stripper used for stripping pavers is acid. Acid can cause the paver to crack and become discolored. If you’re not careful when using this kind of chemical on your pavers, you could end up with an ugly looking patio or walkway that has lost its luster.

Paver stripping
how-to-remove-ice-from-pavers

Paver Sealer Stripping and Brick Paver Restoration

Paver sealer stripping and brick paver restoration is a process of removing the old paver sealant from your pavers (concrete or brick pavers) and applying a new coating. Over time, paver sealants can wear down and lose their effectiveness. This can allow moisture and dirt to penetrate the pavers, causing them to become stained and discolored.

Paver sealer stripping and brick paver restoration will remove the old paver sealer and any build-up of dirt or grime, restoring the pavers to their original condition. In addition, a new coat of paver sealant will protect the pavers from future staining and damage. Paver sealer removal and restoration is an important part of maintaining the beauty of your home’s exterior.

Paver-sealing

Stripping off Failed Paver Sealant

There are a few ways that you can go about stripping the failed paver sealer off your driveway or patio. The first option is to use a chemical paint stripper and a pressure washer with special pressure washing equipment. This will quickly remove the failed sealer, but it can also damage your pavers if you’re not careful. This is a labor intensive process, and it can damage your pavers if not done correctly.

Paver-stripping-failed-pavers

Tell me the White Haze on Pavers?

Unfortunately, when the white fog or haze appears it’s necessary to remove the old sealer and apply another layer. This is generally caused by moisture becoming trapped between the pavers and the sealer.

For trapped moisture or if you have sealer buildup, to make the white haze disappear, you just have to apply a solvent over pavers. The substance will “reset” the sealer. This will only work for solvent based paver sealers and the white or haze is likely to return. It’s best to remove the old solvent based sealer and reapply a water based paver sealer.

Applying too much paver sealer or not enough can both cause the appearance of a white haze on pavers. It’s also essential to follow all manufactures’ recommendations for application rates and curing times. Failing to do so can also result in a haze appearing on your newly sealed pavers.

Paver-stripping-driveway

How to strip sealer from Brick and concrete Pavers?

remove paver sealer, concrete sealer, brick sealer with a chemical stripper There are a few ways to remove paver sealer with a chemical stripper. You can use: A commercial paver stripper such as NPS RX Paver Sealer Remover . A gel stripper, an organic solvent such as lacquer thinner, acetone, or methylene chloride. Better consult a professional paver sealer stripping company Apex Paver Sealing.

Do pavers need to be stripped before sealing?

Over time, pavers can become stained and faded, making them look old and worn. However, with a little bit of care, they can be easily restored to their original beauty. One important step in caring for pavers is sealing. Sealing helps to protect pavers from staining and weathering, and it can also make them easier to clean.

But before sealing, it is important to strip the pavers of any existing failed paver sealer. This will ensure that the new paver sealant will adhere properly and last for many years to come. Stripping brick paver sealer before sealing your pavers again is a difficult process. It is one that should not be overlooked if you want your pavers to look their best and should be done by a professional paver sealer stripping company.

Paver

Popular Methods of Removing Paver Sealer

Three of the most popular methods for removing paver sealer: using a pressure washer, using a chemical stripper, and using a steam cleaner.

Pressure Washer

Pressure washers are a great tool for removing paver sealer. But before you start, there are a few things to keep in mind. First, make sure you have the right paint stripper and pressure washer equipment for the job. If you’re not sure, ask or hire a professional pressure washing service. Second, always wear protective gear, including gloves and eyewear. Third, be careful not to damage the pavers themselves. Damage can easily be done if you don’t have the right equipment and chemicals. It is best to hire a professional paver sealer stripping company such as Apex to get the job done right!

Pressure-washing

Steam Cleaner

There are a few ways to remove paver sealer with a steam cleaner. You can try a few of these methods to see which works best for you:

  • Use a degreaser or citrus-based cleaner to soften the sealer before steaming it off.
  • Try using a pressure washer with a steam attachment to help loosen the sealer.
  • Boil water and pour it over the sealed pavers, then use the steam cleaner to scrub them clean.
  • If all else fails, be sure to contact a professional Paver sealer stripping company.

How to use Paver Sealer Stripper?

Paver sealer stripper is a caustic chemical that is used to remove existing sealers from pavers. It is important to be very careful when using any paint stripper, as it can damage the pavers if not used correctly. Many people choose to hire a professional contractor to remove sealer from their pavers, as they have the experience and knowledge necessary to avoid any damage.

However, if you are planning on stripping the sealer from your own pavers, there are a few things you need to keep in mind. First, always make sure to wear gloves and eye protection when working with the paver sealer stripper. Second, be sure to thoroughly rinse the area after using the sealer stripper, as it can be harmful if left on the pavers. Finally, always test the stripper in a small area before applying it to the entire surface. By following these simple tips, you can safely and effectively strip your pavers without damaging them but it’s best to hire a professional paver sealing company such as Apex Paver Sealing to avoid failure.

It’s better to hire a professional if you want to strip pavers and seal them at the same time

Hiring a professional is recommended if you want to strip pavers and seal them at the same time. There are a few reasons for this:

  • Professionals have the right equipment for the job. They’ll use a paver sealer stripper, which is used to remove old sealants from your pavers. This could take hours or days if you try to do it with tools like wire brushes or sandpaper.
  • Professionals have experience doing these projects and know what they’re doing when it comes to stripping old sealants off of pavers without damaging them in any way. If you try this yourself, chances are good that you’ll end up damaging some of your pavers because you don’t know how much pressure or force is needed during this process (especially when it comes down to removing thick layers of old sealant).
  • It’s also faster for professionals; since they’ve used these machines before, they’re familiar with them and how long each part takes until completion (for example: stripping vs sealing).
Paver-cleaning-moss-between-paver-brick

Hiring a contractor is usually less expensive than buying all of the equipment yourself and only takes a few hours

If you are planning to strip sealer from your pavers, it is a good idea to consult an experienced professional. This is especially true if you have never done this type of work before. Hiring a contractor is usually less expensive than buying all of the equipment yourself and only takes a few hours. There are many advantages to hiring an outside contractor for this job:

  • A professional will bring all of their own tools and supplies, which means no trips to the hardware store for extra supplies that may not be available in your area or not at all if they don’t carry them.
  • They will know how best to strip different types of pavers without damaging them (this includes clay brick and concrete pavers). If you try stripping your own concrete paver without proper training or experience, there’s a good chance you’ll end up damaging it more than necessary (or completely ruining it).
  • Hiring someone with experience means no need for trial-and-error learning; they know exactly what steps need to be followed in order for results that meet your expectations.
Man-applying-paver-sealer

Apex Paver Sealing

The good news is that paver stripping is easily and affordably remedied with the right equipment and experience of the contractor. If your pavers are loose or cracked, it’s time to call in a professional. They’ll make sure you get back to enjoying your space as soon as possible!

Apex Paver Sealing is the premier paver sealer contractor across the United States of America. We focus on educating our contractors about the proper process for paver sealing and paver sealer stripping in order to provide our clients with the highest quality workmanship at the most competitive rates.

We understand that misinformation and miseducation of our industry exists, which is why we are dedicated to providing premier solutions for paver sealing needs. Our extensive network of paver sealer contractors and pressure washers allows us to provide the highest quality services to all of our clients. For more information about our company or to get a free estimate, please contact us today. We look forward to serving you!