Brick-patio-floor

How To Seal Brick Patio & Make It Look New

We all love having a patio in our backyard. It’s a great place to hang out and enjoy the summer sun, but sometimes it can get a little dull. Fortunately, there are ways to make your look new again that aren’t too hard or expensive. How to Seal Brick Patio:

Clean the surface

  • Using a pressure washer, clean the surface of your patio.
  • Next, use a degreaser to remove any loose debris and dirt from the brick surface. If there are any stains or mildew on your bricks, you can use bleach to remove them now.
  • Finally, rinse off all chemicals and let it dry for about an hour before sealing it.

Power wash

The first step in seal brick patio is . This will help remove dirt and debris that may have built up on top of the brick over time. Cleaning the surface will also allow you to see what areas need to be sealed better because they might not be as clean as others.

To properly power wash your brick patio, use a pressure washer that has at least 1000 PSI (pounds per square inch). To get started, mix 1/3 cup mild soap with 3 gallons of water in a bucket or large tub and pour over the surface of your bricks. Use a wire brush or scrubbing pad to remove any loose paint or mortar from around the edges where it meets steps or walkways surrounding your patio area. You can also use an angle grinder with a wire wheel attachment if needed instead of doing this by hand using a wire brush, but make sure you wear protective eyewear when using this tool so dust doesn’t go into your eyes while you’re working!

Remove old sealant

To remove the old sealant and clean the surface of your bricks, you’ll need a scraper and wire brush. If they’re not included with your patio kit (most don’t include them), you can buy these tools at any hardware store. Next, use a wet/dry vacuum to remove all dust from around the patio area.

Sealed-vs-unsealed-brick-patio

Apply a primer

You may have read the step above and assumed the primer was optional, but it’s not. You should always use a primer before applying any sealant to brick pavers. Primer is a must if you want your brick patio to look new for many years to come!

Primer helps sealant last longer because it prevents moisture from getting into the pores of your pavers, which can cause rapid deterioration over time. Primer also helps make sure that when you apply your top coat of sealant (which will be much easier than trying without), it’ll adhere better and blend in better with your existing bricks so that there aren’t any noticeable seams or bumps where two different kinds meet.

Paint the brick

Paint the brick. Now you’re ready to paint your bricks. If you are planning on applying sealant by brush or roller, use a new foam roller and a heavy-duty paintbrush (3/4 inch wide) for best results. You can also rent a professional sprayer from your local home improvement store if you want to speed up the process and make it look even more professional!

How-To-Seal-Brick-Patio

you can make your brick patio look new again with some well-applied sealant

To get a smooth, even coat of sealant on your brick patio, you can use any of these methods to apply it, How to seal brick patio:

  • Paintbrush or roller: It’s best to use an applicator that’s designed for the type of surface you are working with (paintbrush or roller). You may need different sizes depending on what type of sealant and method you choose.
  • Sprayer: If you have a sprayer attachment for your garden hose, consider spraying your bricks with sealant. This will help prevent over-coating and dripping when using a paintbrush or roller.3. Paint pad: Another option is using a paint pad that has been dipped in the appropriate amount of sealant for the surface being treated (e.g., ¼ inch thick for vertical surfaces).4. Paint Roller/Brush Attachment: Finally, if all else fails—or if applying directly from the container seems too messy—you can utilize an attachment that allows users to roll their own material such as newspapers onto their surface before applying any coating materials onto them individually by hand instead via artificial means such as air pressure from an aerosol container onto each individual layer until finished coating process is complete!
Sealing-brick-patio

Conclusion

The key to making your brick patio look new again is being patient and thorough. It’s important to remember that when you’re dealing with surfaces as old as this one, they need a lot of moisture in order for any sealant or paint job to stick properly. So if you don’t have time for multiple coats of sealant, then consider hiring someone else who does know what they’re doing – like a professional painter!