Pavers are a great way to add value to your home and increase its curb appeal. How much does it cost to seal pavers? What are the benefits of sealing pavers? Pavers can be used on a patio, walkway, driveway, or even as a pool decking material. The paver surface is porous and absorbs water which may cause cracks in the paver over time. It is important to seal your pavers in order to increase their longevity. When sealed properly, pavers require less regular maintenance and can last for many years without breaking down or cracking as asphalt does over time.
How much does it cost to seal pavers?
To answer the question, “How much does it cost to seal pavers?” you need to know how many square feet of pavers you have and what type they are. The following steps will help you determine the cost:
- Measure your paver area. Take note of the length and width of each section that needs sealing.
- Estimate how many square feet of sealer you'll need for this project by multiplying these measurements together (length x width).

Why should pavers be sealed?
Sealing pavers is a great way to protect them from wear and tear. It also makes your patio look new, which is always a plus in the world of home improvements. By sealing your paver surfaces, you're helping to prevent stains on them as well as making them last longer.
It can be tempting to skip this step because it seems like an unnecessary expenditure of time and money. However, if you want your patio or walkway to look its best for years (or decades) after installation, sealing is necessary.
Why clean pavers before sealing?
Pavers are made to last, but they can still get dirty over time. When you're cleaning pavers before sealing, it's important to make sure that you remove dirt and dust from the surface of your concrete or stone. If left on the pavers, dirt will be trapped in between each stone when you seal them and could ruin the look of your patio or walkway.
To avoid this problem, make sure that you thoroughly clean any dirt off of your concrete or stone prior to sealing with a pressure washer. You'll want to use an industrial-grade power washer because they have more pressure than residential models—this will ensure that all traces of oil and grease are removed from your driveway as well!
After cleaning off all visible marks, including rust stains or paint splatters (if applicable), apply a sealant directly over the entire surface so that it penetrates every paver's pores where mold may have formed underneath during its previous life outdoors without getting stuck in grout lines where cracks could form later on down south…

What Type of Paver Sealer to Use?
There are two types of sealers: oil-based and water-based. Each has its own pros, cons, and best applications.
Oil-based sealers are more durable and provide longer-lasting protection against the elements, but they can be difficult to apply. Water-based options are easier to work with because they don't require brushes or spray equipment (just rags), but they won't last quite as long on your pavers as their oil-based counterparts will. If your patio or walkway is in an area that gets lots of traffic (like near a driveway), then you'll probably want to opt for an oil-based sealer—it'll stand up better over time under heavy use conditions than a water based one would without reapplication every year or two!
To know more about what Paver sealer to use visit The Paver Sealer Store!
Sealing Pavers Do's and Don'ts
When applying a paver sealer, there are several important things to keep in mind:
- How much does it cost to seal pavers?
- Make sure that the sealer is thin enough to soak into the pavers. A thick layer of sealer can trap moisture and cause discoloration from mold or mildew growth.
- Don't apply a new coat of sealer if it's windy outside. Wind will blow away a lot of your hard work before it has time to dry properly, leaving you with uneven coloration or streaking issues once dried.
- Don't apply any sort of sealer on hot paving stones (over 70 degrees Fahrenheit). Your patio cannot absorb moisture while heated up like this, so the sealant won't stick properly and will end up flaking off later on down the road when cold weather arrives and frost starts cracking up your pavement again!
It is important to seal your pavers in order to increase their longevity.
You should seal your pavers in order to increase their longevity. By sealing the pavers, you can prevent stains and discoloration from occurring, as well as moss and mildew growth. Sealing will also prevent cracks and chips. Sealing increases the value of your home by keeping it looking newer for longer!

Conclusion
How much does it cost to seal pavers? What are the benefits of sealing pavers? I hope these questions were answered because sealing your pavers is a great way to extend their lifespan and keep them looking beautiful. If you want your paver patio or walkway to last for many years to come, then it's essential that you seal them once every few years.
Learn more at Apex Paver Sealing!