Red-brick-floor

Brick Paver Sealer – 7 Tips on How to Apply It Correctly

Brick paver sealer is a great way to protect your investment. It provides protection against stains and water damage, helps maintain the color and integrity of your pavers, and keeps them looking nice for years to come. But before you apply that , you need to make sure you have everything ready in order to get the best possible results. Here are some tips on do just that:

Protect your investment

Protect your investment by choosing the right sealer.

If you're using brick pavers, it's important to protect them from the elements. In order to do so, choose a brick that will keep out moisture and prevent the pavers from cracking or losing their color. You may also want to look for a product that contains UV inhibitors as well—these help keep colors bright and vibrant over time.

After choosing your brick paver sealer, make sure you apply it correctly. The best way to do so is during dry weather conditions in temperatures above 42 degrees Fahrenheit (5 Celsius). This helps ensure that each layer dries completely before applying another one so there are no gaps between applications which could lead to peeling later on down the road.

And finally: lay down an even coat over all surfaces of your bricks by either rolling or spraying them evenly with the product!

weeds-growing-on-brick-floor

Choose the right sealer

When choosing a sealer, it's important to choose one that is designed for pavers. A high solids content means that there are more moisture-resistant chemicals in the sealer and this will help prevent cracking or chipping of the pavers. Look for a product with a high UV rating – this will make sure that your bricks look great for years to come!

Finally, when looking for a you'll want one that has a high gloss rating (gloss refers to how much shine/shineability there is). The higher the gloss number, the shinier your brick will be.

Apply the sealer during dry, cool weather

  • Apply the sealer during dry, cool weather.
  • Do not apply the sealer when it is raining or snowing.
  • Do not apply the sealer in warm, humid weather.
  • Do not apply the sealer on hot days (above 80 degrees).
Dry-cool-weather-to-apply-brick-paver-sealer

Apply the sealer in thin, even coats

The sealer should be applied in thin, even coats. Using a roller or sprayer is the most effective way to do this. You can also use a brush for corners and edges, but this may leave behind brush marks that are visible after the sealant dries.

  • If you are using a roller or sprayer:
  • Apply one coat at a time and allow it to dry completely before applying the next coat. If using a roller, apply pressure to ensure that there are no gaps in coverage between strokes
  • Use an electric sander with fine-grit sandpaper (150–220) when you're finished applying your final coat if you want your surface to be perfectly smooth

Use roller or sprayer for application

Brick Paver Sealer is a product that should be applied by professionals or homeowners with experience in painting and applying sealers. The best way to apply the sealer is with a roller, sprayer, and paintbrush.

  • Rollers: for large areas like patios, porches or driveways use a roller. They're easy to use but can cause streaking if not used properly.
  • Sprayers: for small areas like walkways or steps use a sprayer that will give you an even application without any brush marks that may occur using the roller technique.
  • Paintbrushes: corners and edges are much better when done with a brush rather than rollers or sprayers due to their smaller surface area requiring more attention when painting them.
Brick-paver-floor

Dry between coats

The first step in applying sealer is to let it dry for at least 24 hours. If you're working in a humid climate or it's very cold outside, you may need to wait longer than 24 hours before applying the next coat.

Let sealer cure before foot traffic and driving

Once you have applied your sealer, it is important to allow at least 24 hours of curing time before foot traffic and driving. This will give the sealer a chance to cure properly and create a strong bond between itself and the surface when it dries out. If you apply too soon, you may end up with cracks in your pavers that can lead to damage down the road. Once this step is completed, make sure children and pets stay away from any sealed area for at least two days so they don't accidentally track materials into the wet sealant before it completely dries out.

Conclusion

Once you've applied a brick paver sealer, it's important to let it cure before you walk or drive on it. This will ensure that your new sealer is durable enough to keep up with the demands.

Do you want to know more? Visit Apex Paver Sealing, we will be glad to help you!