Travertine pavers are a beautiful addition to any home. Sealing travertine pavers with the right sealant can last for decades without looking worn or damaged. But finding the right sealant is not always easy. There are many different types of sealants on the market and each one has its own benefits and drawbacks. In this article, we’ll go over how to choose the right sealant for your travertine pavers, how to apply it correctly, and what you should expect after using it!

Clean the travertine first

The first step in sealing travertine pavers is to clean them. You can use mild detergent and water, but don’t use power scrubbers or abrasive cleaners, which can cause scratches. Avoid using vinegar or bleach and commercial cleaners as they will remove the protective wax coating on your stone. Also, never use steel wool or steel brushes, since they will also remove the wax coating.

Use a Sealer

When sealing travertine pavers, it is a good idea to make sure that the sealer you are using is pH balanced. This means that it has been formulated to be non-toxic for both humans and the environment. It also means that the sealer does not contain solvents or petroleum products, which can be harmful when used in large quantities.

It’s important to note that there are many different types of sealers on the market today—some are made with water while others use alcohol or oils as their main ingredient. The type of product you choose will depend on what your needs are as well as how much money you’re willing to spend on maintaining your patio or driveway surface over time.

Let the Sealer Dry completely

After applying the sealer, you should wait for at least 24 hours before walking on your pavers. If you have pets or small children that are prone to tracking mud in from outside, it is a good idea to keep them off of your newly sealed pavers for 48 hours after application.

Be sure not to sweep up the excess sealer with a broom as this could cause damage and make it more difficult for the sealer to dry properly.

Sand the Pavers

Once the pavers have been laid, it’s time to seal them. A good first step toward sealing your travertine is to sand any irregularities in the surface of your pavers. Use a power sander or hand sander as needed, but make sure you use fine grit sandpaper and vacuum up all the dust afterward.

Once you’ve finished with that step, follow these steps:

Use a clear sealant

Clear sealants are the most common type of sealant, and they’re easy to apply and maintain. They can be used in both indoor and outdoor settings and come in different colors, so you can select one that complements your pavers’ appearance or matches other surfaces around your home.

• Choose one that is backed by a manufacturer guarantee or warranty (at least two years). This way you know it will last for years without needing to be reapplied as often as some other types of sealants might require after application has been compromised due to weather conditions like excessive heat from sunlight exposure or freezing temperatures during winter months which could cause cracks or chipping around edges where moisture collects because there weren’t any drainage systems installed under pavers before installation occurred!

A great Travertine paver sealant can keep your pavers looking their best for a long time.

A great paver sealant can help you keep your pavers looking their best for a long time.

When it comes to sealants for Travertine pavers, there are two main types: Those that are clear and those that are tinted. Clear sealers work well when you want to leave the original color of your travertine intact. Tinted sealers provide additional protection from stains and discoloration, but they will change the overall appearance of your stone. If you decide on a natural stone cleaner before applying either type of sealer to your paver tiles, remember to apply in small sections at a time so that any residue dries evenly on all surfaces before continuing on with another section or side of each tile (if needed).

Conclusion

If you follow these five tips when sealing travertine pavers, you’ll be well on your way to having a beautiful and long-lasting paver patio. Remember that each time you seal the pavers, they will need to dry before applying another coat. This is why it’s so important for homeowners who live in humid areas like the northeast United States or southern Canada where it rains frequently during springtime when their outdoor spaces are most likely being used often by family members and friends during warmer weather months.

Learn more at Apex Paver Sealing!